The BlueAnt S1 Supertooth is a portable Bluetooth receiver. Clip it on to your car visor and keep both hands on the wheel while you use your wireless phone. If you've just acquired a Supertooth device, you'll need to take a few moments to set it up before it is ready for use. Plug your S1 into the AC adapter and allow it to charge---this usually takes about three hours. Leave the headset off to begin the pairing process.
Instructions
1. Access your phone's Bluetooth settings and turn Bluetooth on. For most devices, the Bluetooth options can be found under "Tools" or "Settings" in the main menu.
2. Press and hold the Supertooth's green "Multi-Function" button for approximately five seconds. Release the button when the indicator light flashes red and blue. The device is now in pairing mode.
3. Select "Add New Device" or "Search For Device" from your phone's Bluetooth settings menu. Your phone will search for several seconds, then display a list of available devices.
4. Select "BlueAnt S1" from the device list and press "OK." You will be prompted for a pass key. Enter "0000" using your phone's keypad to complete pairing.
Tags: Bluetooth settings, phone Bluetooth, phone Bluetooth settings, your phone, your phone Bluetooth