The EnGenius ECB 3220 is a wireless network access point. The EnGenius ECB 3220 broadcasts a wireless Internet signal that may be received by other computers in the area. The ECB 3220 can broadcast a signal as strong as 400mW. Setting up the EnGenius ECB 3220 will take about 10 minutes to complete.
Instructions
1. Connect an Ethernet cable to the port labeled "AP/Router." Connect the other end to high speed modem.
2. Connect an Ethernet cable to the port labeled "Network" and connect the other end to your computer.
3. Connect one end of the power adapter to the port labeled "DC240V." Connect the other end of the cable to an available wall outlet.
4. Turn on your computer and open the "Control Panel."
5. Double-click "Network Connections," then double-click "Ethernet Adapter."
6. Click "Internet Protocol(TCP/IP)," then click "Properties."
7. Click "Use the Following IP Address," then enter the IP address and your subnet mask. Click "OK" to complete the process.
Tags: EnGenius 3220, port labeled, cable port, cable port labeled, Connect Ethernet