Take Apart A Razr Phone

If you want to modify, upgrade, or change the SIM card on a Motorla Razr phone, you will need to take it apart without scratching the paint or affecting the hardware. Disassembling the Razr phone is a relatively simple process and you only need a few small tools to open it.

Instructions

1. Remove the battery door. Flip the Razr phone over and pop open the battery door using a small flathead screwdriver or the plastic card.

2. Remove the SIM card. The SIM card will be located under a clip on the right side of the phone. Gently tug on it to pull it out from the top.

3. Loosen the T6 screws. You will see two silver T6 screws, one on either side of the phone. Unscrew these using the T6 screwdriver and set them aside in a safe place.

4. Remove the bottom of the Razr. You will need to gently pull apart the bottom of the phone, using a SIM card or another thin card. Avoid using a screwdriver for this because it is easy to scratch or damage the phone with a sharp object.

5. Pull the phone apart. There is one more small piece of plastic holding the phone together, but it will come apart when you pull gently on the bottom of the phone.

6. Remove the keypad. Bend the small metal tabs holding the keypad in place on the inside of the phone. Use the T5 or T6 screwdriver to pry them upward so that the keypad cover can be removed.

7. Remove the screen. Use the T5 screwdriver to remove the rubber dots in each corner of the screen, then unscrew the T5 screws in each corner. The screen can be moved easily with your fingers or the SIM card.

8. Unclip the cover. Gently pull up the cover of the Razr to remove the entire cover off the phone. The cover is connected with small plastic clips on both sides. And it can be snapped in and out with light pressure.

Tags: battery door, bottom phone, corner screen, each corner, each corner screen, Razr phone, screwdriver them

What Is The File Extension Dpb

File extensions are the end of file names that indicate the type of file. Extensions range from one to five characters, with most being three. Computer operating systems are told what program should open a file from file extensions.

File Type

File extension .DPB is a database file.

Notes

These file types are normally related with "DataPilot" by Susteen Inc. This software allows you to access the Internet through your cell phone.

Applications

Applications related with file type .DPB are:

Dataplore Signals

Fax Master File

ProWORX Nxt Descriptor Pointer File

Registry Errors

If Windows displays the message "Cannot open DPB files," this means your registry might be damaged or you do not have the proper programs installed on your computer.

Registry Scan

A registry scan will let you know if you have the required programs installed on your computer. Registry Booster is one of many programs that can run a free registry scan.

Tags: computer Registry, installed your, installed your computer, programs installed, programs installed your, registry scan, related with

Reset The Password On A Silent Witness Tlone Dvr

The Silent Witness TL-One is a single-channel DVR that can store up to 120 GB of data. It is designed to function like a VCR, but without the use of tapes, as it stores programs digitally. The system has various menu functions, including a password-protection feature. The password is programmed in during the initial setup phase. To change the password after that point, you must reset it by following a specific set of steps.

Instructions

1. Press the "Setup" button on the front of the DVR. Press the "Enter" button to enter the configuration menu.

2. Press the arrow buttons on the remote control to highlight "Server." Press "Enter."

3. Press the arrow buttons to highlight "Add/Change" next to the user account for whom the password will be reset. Press "Enter."

4. Press the arrow buttons to move to the "Password" field. Press "Enter."

5. Input the current password using the onscreen keypad or the remote control keys.

6. Press the arrow buttons to move to the "New Password" field. Input the new password using the onscreen keypad or the remote control keys. Press "Enter." Repeat the password to confirm.

7. Highlight "Save" with the arrow keys. Press "Enter." The password has been reset.

Tags: Press Enter, arrow buttons, Press arrow, Press arrow buttons, keys Press, remote control

Install Jar On Cell Phones With Data Plans

JAR files are Java application install files often used for installing small programs on smartphones and handheld devices. To install a JAR file on your cellphone, you must have a data plan that permits you to download the JAR file. Next, you'll need to make sure your phone has Java installed and that the device can run the Java applications that you install. If Java is installed on your mobile phone, the device most likely will support a JAR installation.

Instructions

1. Open a Web browser on your cellphone and navigate to a free JAR download site such as GetJar.com.

2. Click on your phone model if the website does not identify your phone. A list of applications compatible with your cellphone will display. Each application listed is a JAR file.

3. Select the Java app that you want to download and click the "Download" option. Click "Yes" or "OK" for additional notifications about the installation. The JAR file is downloaded and the application is installed on your cellphone.

Tags: your cellphone, your phone, installed your, Java installed

Activate A Samsung Bluetooth

Connecting your Bluetooth headset to your Samsung phone gives you the ability to talk hands free.

A Samsung Bluetooth headset is a wireless device that will allow you to use your mobile phone to make and accept phone calls without actually using the phone (although it must be in range of at least 30 feet). The Samsung Bluetooth is a small earpiece that features both a mouthpiece and a speaker, making it ideal for those who want to make a call hands free. Syncing your Bluetooth device with your Samsung phone is a simple process.

Instructions

1. Turn on both your Bluetooth headset and your Samsung phone. Press "Start" on your phone and choose "Settings." Select "Connections," then choose "Bluetooth." Select "Mode" and select "Turn on Bluetooth.

2. Select "Devices" and select "New" to open a list of devices your phone senses. Select your Bluetooth headset by name from the list and press "Next." Enter "0000" in the the passkey field and press "Next."

3. Enter a name for your headset, check "Hands Free," then press "Finish."

Tags: Bluetooth headset, your Bluetooth, your Samsung phone, Samsung Bluetooth, Samsung phone

Put A Jawbone In Pairing Mode

Put a Jawbone in Pairing Mode

Jawbone Bluetooth headsets are among the most popular due to their advanced technology that enables a clearer connection and better audio quality, and an adjustable noise-cancelling button. When this noise-cancelling button is touching your cheek and angling down toward your mouth, the Jawbone Bluetooth headset is in prime position to deliver clear and crisp connections. Put your Jawbone in pairing mode to connect it with your mobile phone.

Instructions

1. Turn your Jawbone on. If this is the first time you are doing so, it will enter the pairing mode immediately without you doing anything. If this is not the first time you are turning your Jawbone on, proceed to step two.

2. Press the "NoiseAssassin" button while turning the Jawbone Bluetooth headset on. Hold the "NoiseAssassin" button for two additional seconds.

3. Watch for the Jawbone to flash a red and white light. This indicates the Jawbone is in pairing mode.

Tags: Jawbone Bluetooth, pairing mode, your Jawbone, Bluetooth headset, first time, Jawbone Bluetooth headset

Unlock Nokia E61

Unlocking your Nokia E61 is easy with unlock codes.

The Nokia E61 was released in 2006. It was one of Nokia's first smart phones that uses the Symbian operating system. In addition to being able to email, edit documents and surf the Web, it has a full QWERTY keyboard and wireless options including Bluetooth and Wi-Fi. If you are interested in using the phone outside of your country then you must unlock it, otherwise you will pay high roaming fees. To do this you need an unlock code.

Instructions

1. Find your Nokia's serial number. This is also known as the IMEI (International Mobile Equipment Identifier) number. Do this by dialing *#06# into the keypad. A 15-17 digit code instantly appears on the screen. Write down the number.

2. Go to a website that sells unlock codes for the Nokia E61. A few sites that you can use are GlobalUnlock.com, Unlockster.com, and UnlockToTalk.com (see Resources). These sites provide a code for $14.99 to $29.99, as of 2010.

3. Type the serial number (IMEI) into the website that you've chosen to use. For the "make" of the phone, select Nokia; for the "model," choose E61 from the drop-down boxes. Choose United States for the "country" and "AT&T" for the "carrier." Enter your payment details and email address and purchase the codes.

4. Check your email in one to two days. Write down the code exactly as you see it.

5. Turn off your Nokia E61 and remove the battery and SIM (subscriber identity module) card. Replace it with a SIM card from a different cell phone carrier. Replace the battery and turn on your phone. When your phone prompts you for the unlock code, type it in exactly as you see it. The phone beeps, flashes and restarts. When it comes back on, the new cell phone service logo appears at the top of the screen.

Tags: your Nokia, appears screen, cell phone, codes Nokia, serial number

Activate A Boost Phone With No Activation Code

Cell phones provide a great alternative to stationary house phones.

Boost Mobile offers three different options when activating a phone. You can activate a phone you purchased by calling the customer care hotline, by using the website or by utilizing the services at an authorized Boost dealer. If you purchased a phone that already has the SIM card, then you may not have an activation number. It is still possible to activate the phone through a dealer or by phone, but you cannot use the Internet activation option unless you purchase an activation kit.

Instructions

1. Locate the IMEI number on your phone by removing the battery and looking for the number near the bar code, on a sticker inside of the phone. You can find the SIM card number on the SIM card.

2. Write down both numbers so they are readily available during the activation process.

3. Call Boost customer care or visit an authorized dealer and let them know you wish to activate your phone and that you do not have an activation code. They will advise you of a $10 activation fee that you will have to pay unless you buy an activation kit.

4. Complete the activation process by giving requested information, such as address and other personal information, and selecting a PIN for your account. Boost will activate the phone shortly after they receive all relevant payments.

Tags: activate phone, activation process, customer care, have activation, phone that, your phone

Call Voicemail

There are several circumstances that could keep you from taking a phone call. Voicemail is a service that allows people to leave you a message without your needing a piece of additional equipment, such as an answering machine. If you are new to voicemail, you may be a little unclear on check messages left in your voicemail box. By following the steps below, you can call your voicemail and listen to messages left in the voicemail box.

Instructions

Using Your Phone

1. Turn your phone on if you're using your home phone.

2. Dial your phone number.

3. Listen to the recorded message.

4. Type in the password for your voicemail box. Listen to the next message carefully to know which button to press to listen to your voicemail.

5. Press the appropriate button to listen to your voicemail. At the end of the voicemail, another message plays with instructions for saving or deleting that message.

6. Hang up or press the "End" or "Talk" button to disconnect from your voicemail.

Using Another Phone

7. Turn the phone on if necessary.

8. Dial your home phone number. Allow the phone to ring until it goes into your voicemail box.

9. Press the "Pound" (#) key on your phone once you hear the voicemail notification or message. This must be done before the message ends or you have to disconnect and call again.

10. Enter your voicemail password when instructed to do so. Listen to the instructions for checking your voicemail messages.

11. Listen to the messages in your voicemail box. Follow the instructions given at the end of the message for saving or deleting that message. Hang up or press "End" or "Talk" to end the call and disconnect from your voicemail.

Tags: your voicemail, your phone, deleting that, deleting that message, Dial your, disconnect from, disconnect from your

Turn On The Speakerphone On A Nokia 6085

Use your Nokia 6085's speakerphone to make and listen to calls.

Speakerphones, also known as loudspeakers, allow you to communicate to others hands free while using your cell phone. The feature is present on a variety of cell phones including the Nokia 6085. The default setting for the speakerphone is "Off" and is easily turned on during a call, before a call or while listening to the radio on your Nokia 6085 phone. The speakerphone feature is accessible through the "Options" menu. Once you complete your call, the speakerphone is returned to an "Off" state.

Instructions

Accessing the Speakerphone -- Before or During a Call

1. Press the left selection key under the wording "Options" on the Nokia 6085 screen. The Options menu will open.

2. Scroll to "Loudspeaker."

3. Press the left selection key to select "Loudspeaker."

4. Place the phone on a desk, other surface or hold the phone in your hands. Speak normally to the other party on the phone.

Accessing the Speakerphone -- While Listening to the Radio

5. Press the center button on the Nokia 6085's keypad to select "Menu."

6. Scroll to and select "Media."

7. Select "Radio." The Nokia 6085's Radio feature will turn on.

8. Press the left selection key under the wording "Options." Scroll to "Loudspeaker."

9. Press the left blue selection key to select "Loudspeaker."

Music will now play through your phone's speakerphone.

Tags: Nokia 6085, Press left, left selection, Press left selection, Accessing Speakerphone, left selection under

Compose A Song On The Computer

The great thing about the computer music revolution is it makes it so much easier to compose music, even for novices. Of course, some amount of talent is necessary, but you can build up a song piece by piece, rather than trying to handle everything at once.

Instructions

1. First, get yourself a good multi-track recorder. If you're on Mac: Logic or Garageband. If you're on PC: Cubase or Pro Tools. There are many others. Make sure you're able to record a maximum number of tracks-your computer's processing power has a lot to do with this, not just the program itself. You'll also need an audio interface to record guitar, bass, or vocals.

2. Start with the drums. Lay down a simple drum track and let it play out for three to four minutes. Using a drum machine or loops makes this a lot easier. Loops are pre-recorded drum parts. A lot of loops can be downloaded for free online.

3. Add a bass line. Again, you can use loops. You can splice different bass lines together for the verse, chorus, and bridge.

4. Add synth, guitar, or other instrument. Here, a midi controller is highly recommended-a keyboard that triggers software or virtual instruments. You can switch around between instruments to see what sounds best-for example, play the same part as piano, as synth, as guitar, etc.

5. Add a vocal line. This is what trips people up, especially if they've never sung before. A good trick is to play a vocal line on the keyboard first, rather than writing the part with the voice. The same goes for harmonies-try and find the harmony on the keyboard or guitar, instead of trying to sing it. If you're really timid about this, start with an instrumental.

Tags: rather than, synth guitar, vocal line

Activate An Optus Sim Card

SIM cards store information on cell phones.

The Optus SIM card is ideal if you travel abroad to Australia. After you set up your phone to work outside of the United States, you can insert an Optus SIM card to use while in the Australia. The SIM card is the "heart" of your cell phone. It is where all of your contact data, messages and contacts are stored. This way, if you need to switch phones, as long as the SIM card is working, you can transfer your saved information.

Instructions

1. Open your web browser and go to the Optus activation page (see Resources).

2. Enter the number at the bottom of the SIM card and click "Submit."

3. Enter the Optus service number which is located on the "Welcome Letter" that you received.

4. Enter your order number. This is located in the confirmation email you received when you placed your phone order.

Tags: Optus card, your phone

Replace A Nokia E71 Keypad

The full QWERTY keypad on the Nokia E71 allows you to quickly navigate around the device and type out quick messages, so if the keypad gets damaged or stops working, the E71 can become mostly worthless. The keypad is simply a thin piece of plastic that sits inside the front housing, so if it gets damaged, it will probably be much less expensive to just replace the part, as opposed to buying a new device. To get to the keypad, first remove the front cover from the E71.

Instructions

1. Turn the Nokia E71 so that you are looking at the back side. Push down on the battery cover, which takes up almost the entire back side of the device, to remove it. Pull out on the E71's battery to remove that as well. Pull down on the SIM card to remove it.

2. Remove the four screws from the back of the E71. There are two screws on each side of the phone, with one at each bottom corner of the device and one at the midpoint of each side.

3. Locate the two small gaps on each side of the E71. The first gap is about an inch up from the bottom of the device, and the second gap is about a half-inch up from the first one. Push down on all four gaps, one at a time, to release the clasps that hold the front housing on the device.

4. Turn the E71 over. Insert your pry tool underneath the front housing. Move your pry tool around the housing until you can lift up to remove the housing from the device.

5. Push down on the front of the keypad to pop it out of the front housing. Turn the front housing over and place your replacement keypad into the opening at the bottom of the housing. The tabs on the side of the keypad prevent it from falling through.

6. Place the front housing back on top of the E71. Push down to snap the housing into place. Turn the E71 over and replace the four screws. Then replace the SIM card, battery and battery cover.

Tags: front housing, Push down, each side, back side, battery cover, four screws

The Best Slide Phones

Slide phones are compact, yet advanced.

Slide phones are now offered by almost every major cell phone provider and can be found for varying prices. As technology progresses, many slide phones now provide many of the bells and whistles that smart phones do, including music, video and Internet. Slide phones give you the power of a smart phone, while still maintaining functionality. Most slide phones are small and fit comfortably into one's pocket and slide-out number pads and keyboards prevent you from accidentally pushing buttons or dialing a number without your knowledge.

Sony Ericsson W760

The Sony Ericsson W760 is a slide phone built like a Walkman. On top of all the features of any other cell phone, the W760 features a stereo-widening effect that makes music sound fantastic from headphones or the phone's built in speakers. It's internal memory can hold more than 950 songs. The device also features Bluetooth capability, built in GPS and a 3.0 megapixel camera.

Samsung Highnote

Much like the Sony model, the Samsung Highnote is a slide phone with music in mind. The Highnote functions as an MP3 player with 1 GB of internal memory. The device also features stereo speakers built into the phone. The Highnote includes a 2.0 megapixel camera with 4x digital zoom. Sprint GPS navigation is also available with a plan.

Nokia 5610 XpressMusic

The Nokia 5610 XpressMusic is a slide phone with a sleek design and even more impressive features. This phone includes MP3 functionality with 2 GB of memory, but also features a music slider that lets the user switch instantly from music player to FM radio. The device also has a 3.2 megapixel camera and a 2.2-inch screen capable of viewing videos.

LG Decoy VX8610

The LG Decoy is has a mirror-like finish and unique joystick controls that make it perfect for mobile gaming. It also includes a music player with 128 MB of memory. This device also has an integrated Bluetooth headset, making hands-free driving as easy as possible. The Decoy also boasts a 2.0 megapixel camera and built-in GPS capability.

Tags: device also, megapixel camera, also features, slide phone, Slide phones

Format A Memory Card On A Nokia 6500s

MicroSD cards can store a lot of data.

The Nokia 6500S is a slider-style cell phone. It is preinstalled with a MicroSD memory card to store pictures, ringtones and other types of data. The card is removable, which means you can replace it with one that has more room. You should format a new MicroSD card before you store any files on it. The formatting process makes the card compatible with the Nokia cell phone. You also can format a memory card with a computer.

Instructions

1. Power off the Nokia phone. Slide off the back panel.

2. Insert a MicroSD card, if it is not already inside. Replace the panel and power the phone back on.

3. Go to "Gallery" from the main menu.

4. Choose "Memory Card" inside "Gallery."

5. Click on "Format Memory Card" and hit "Yes" to confirm it. Wait for the Nokia 6500S to format the card to the phone's filing system.

Tags: cell phone, Format Memory Card, memory card, Memory Card, MicroSD card

Update An Expired Certificate For An Sis

Go online to a SymbianSigned account to generate a new developer's certficate for SIS files.

"SIS" is a type of file format used for installable applications on the Symbian operating system. The Symbian operating system is used by some smartphone devices, such as the Nokia E7. To install a SIS file onto a Symbian-based mobile device, the SIS application has to be "signed." This signature is a security measure of sorts. It's what authenticates the application, providing assurances that the application is not malware or a virus. If a SIS application is not signed by its developer, users can acquire their own Developer's Certificate to sign the application themselves.

Instructions

Update a Symbian Developer's Certificate

1. Go to the SymbianSigned website (see the link in the Resources section) and sign into your user account.

2. Click on the "My Symbian Signed" tab. Select "Developer Certificate" in the menu options. Click "Request." You have to request a new Developer Certificate because once one has expired it cannot be renewed. You will need to be issued a new one.

3. Upload the original .crs (certificate request) file you created when you generated the original Developer's Certificate. If the original .crs file is no longer saved on your computer, you can download the file again from the user account area of the SymbianSigned interface. After downloading and saving the file to your computer, navigate back to the "Request" portal on the SymbianSigned interface and upload the file.

4. Follow the on-screen prompts to generate a new Developer's Certificate. This newly generated Developer's Certificate can be downloaded anytime by logging into your SymbianSigned account. Go to the "My Symbian Signed" tab. Select "Developer Certificate" in the menu options. Click "MyDevCerts" and download the certificate.

Tags: Developer Certificate, application signed, Certificate menu, Certificate menu options, Developer Certificate menu

Send Something Using Bluetooth To An Infrared Phone

Bluetooth lets you connect your cell phone to another cell phone wirelessly. This includes infrared (IR) phones, which also connect wirelessly to other handheld devices. When connected, you can send data files, ringtones, music, videos and photos. You can also access that person's data files and personal information. Learning to connect to other phones via Bluetooth will help you stay connected with your contacts. As long as both phones are infrared or Bluetooth-enabled, you should have no trouble with the setup process.

Instructions

1. Press the "MENU" button on your cell phone. Navigate to "Bluetooth" and select "Enable." Repeat this step for the infrared phone.

2. Select "Add a Device" on either of the phones. Detect the other phone by its model number. Click "OK" to confirm the Bluetooth connection. Repeat this for the other cell phone.

3. Press the "MENU" button on the phone you want to send information. Navigate to "Media" and highlight the media you want to send. Click the "SEND MEDIA" option. Repeat this step for any other media files you want to send (music, songs, etc.).

4. Wait for the infrared phone to receive the media files. The person should receive a message notification that they received a file. They will then need to press the "OK" to accept and open the file.

Tags: cell phone, Repeat this, want send, data files, infrared phone, media files

Wear A Jawbone

Jawbones are headsets that connect to bluetooth-enabled devices, like telephones. They feature technologies that make talking on the telephone and listening to music easy and stress-free. With seven available colors and multiple earpiece options, these headsets are tailored to the individual. Does this Spark an idea?

Product

Jawbone headsets are wireless sets that kill background noise while allowing you to listen to your own media easily. These headsets can connect to multiple telephones and make telephone calls sound crisp and clear with their Voice Activity Sensor technology.

Wearing Your Headset

Familiarize yourself with your Jawbone, making sure that you know where its buttons are located on the outside of the unit. Then, sync the Jawbone to your bluetooth-enabled telephone. Once you've synced, you can select the ear loop on the Jawbone that best fits your ear size, and insert the headset into your ear like you would a set of earphones; make sure that the voice activity sensor is touching your cheek.

Specifications

Jawbone headsets come with seven different ear pieces, so you can find your most comfortable fit. They are 2.11 inches long, 0.56 inches wide and 0.94 inches high, and they weigh 0.39 ounces. They last up to 4.5 hours of talk time, and up to nine days on standby with their built-in, rechargeable Lithium-Ion polymer.

Tags: Jawbone headsets, sure that, with their

Update The Flash Player Active X

Adobe has recently revealed that previous versions of its Flash Player may contain security risks. Adobe recommends updating your Flash Player to safeguard yourself against any potential bugs or errors. You may update your Flash Player by downloading the latest version from Adobe's website.

Instructions

1. Uninstall the previous version of the Flash Player located on your system. Click the "Start" menu. Select "Control Panel." Select "Add / Remove Programs." Choose "Adobe Flash Player" from the list and click the "Uninstall" button.

2. Open your web browser. Navigate to Adobe's website.

3. Select "Downloads" from the menu at the top of the page. Select "Get Flash Player Now" from the drop-down menu.

4. Click the "Agree and Install Now" button. The Adobe Flash Player will detect your web browser to download and install the correct and most recent version automatically.

5. Restart your web browser upon completion to finish updating to the latest Flash Player.

Tags: Flash Player, your browser, Adobe Flash, Adobe Flash Player, Adobe website, Flash Player from, Player from

Convert A Mobile Into A Webcam With Java Software

Turn your mobile phone into a webcam using Java software.

Using your a webcam means that you can see your friends, family, colleagues or clients even while you are away from home or out of the office. You can turn your mobile phone into a webcam, which will allow you to carry one less piece of hardware with you when you are on the road. All you need is a piece of Java software that takes minutes to install and you can be talking and looking at your friends and family in no time.

Instructions

1. Look for Java software that is compatible with your phone. A few programs to consider are Mobile Webcam for Java, Mobile-Mir, and Mobiola (see Resources for the download links). The first two programs can can be downloaded for free and Mobiola is available for $20.00, as of November 2010, and comes with a 7-day free trial.

2. Download the software to your computer and click on the file to install it. Wait for it to install on your computer. These programs have a client software for both your PC and your mobile phone.

3. Open up your mobile phone's web browser and download the software program from the website. Install the software by clicking on the file and clicking "Next." Wait for the program to install.

4. Connect your phone to your computer using a USB cable. Wait for it to recognize the phone. Go to the "Computer" icon on your desktop and look under "Removable Drives." You can also choose to connect your phone to computer using Wi-Fi or Bluetooth.

5. Click on the phone icon. When you do, a video feed will appear on the screen. Improve the image quality of the feed by adjusting the bars present in the video control panel of the software. Your mobile phone has no been converted into a webcam.

Tags: mobile phone, your mobile phone, Java software, your computer, your mobile, your phone

Buy An External Microphone For A Camcorder

While camcorders are equipped with a built-in microphone to allow for sound and image to be perfectly synchronized, the built-in microphone is usually surround sensitive, so it tends to pick up surrounding sounds. In most cases there is a microphone socket on your camcorder for an additional external microphone, which can be used to avoid unwamted disturbances. These items are easy to use and will greatly improve the sound quality of your video recordings. Here's buy an external microphone for a camcorder.

Instructions

1. Ensure that your camcorder is equipped with an external microphone socket. This should be a normal 1/8th" plug.

2. Consider your budget. A good external microphone usually ranges between $120-$300. Read audio-video magazines to investigate reviews and features on the different types of external microphones.

3. Research the different types of external microphones to determine the one that is right for your sound-capturing needs. There are omnidirectional microphones which pick up sounds from all directions, unidirectional microphones which capture audio from one person at a time, or shotgun microphones which pinpoint the isolation of sound.

4. Determine if you need a lavalier or handheld microphone. A lavalier microphone is a small microphone that can be clipped to a necktie or blouse to remain discreet. A handheld microphone is good to use when reporting or when the camera is focused on one person.

5. Consider if you will need a hard-wired or wireless microphone based on your budget and recording needs.

6. Look for noise-reduction features. Some high-end microphones will filter out background and wind noise.

7. Determine if you want an omni-directional or uni-directional microphone. The omni-directional will record sounds that surround the microphone, while uni-directional will only record the sounds from the direction which it is pointed.

Tags: external microphone, microphones which, built-in microphone, different types, different types external, equipped with, external microphones

Copy Themes From An E90 To A Memory Card

Nokia's E90 cell phone first came to the market in 2007. It features a full QWERTY keypad and comes in a clam shell form. The phone offers a number of default themes that you can set on your phone. You can also transfer any of these themes to a memory card. You just need to connect both the Nokia E90 and the memory card to your PC and transfer all the themes you want.

Instructions

1. Plug one end of the phone's USB cable into the phone and the other end into a USB port on your computer. Your PC will prompt you of a new connection in the system tray.

2. Insert the memory card into the memory card reader. Again, your computer will notify you of the new device.

3. Click "Start" and "Computer." Double-click on your phone's memory folder and double-click the "Themes" folder. Hold "Ctrl" and click the themes you want to transfer, and press "Ctrl" and "C" together to copy them.

4. Click "Start," "Computer." From the list of devices shown in "Computer," double-click the memory card device icon. Press "Ctrl" and "V" together to send the copied themes to the memory card.

5. Unplug your PC connections with the memory card and Nokia E90 phone.

Tags: memory card, Click Start, Click Start Computer, Ctrl together, Start Computer, themes memory, themes memory card

Unlock My Phone

Most cell phones have an option that lets you lock the phone so you can protect it from accidentally dialing phone numbers. The locking option also acts as a security feature. If someone has your phone who is not supposed to have it, they can't see what's on your phone without knowing the code to unlock it. You can unlock your phone in a few simple steps, depending on the model of your phone.

Instructions

1. Turn on your phone's display by pressing one of its keys. The screen should indicate whether your phone is locked.

2. Press the key on your phone that corresponds with unlocking it. On some phones, it is near the bottom of the screen above a key.

3. Enter the code you chose as the PIN for your phone, if your phone requires one. A PIN is a personal identification number. You should know if it does or not because you would have previously entered this PIN when you chose to lock your phone. If you don't have a pin, you should just be able to directly choose unlock.

4. Press OK to unlock if your phone prompts you. You should now be able to fully use your phone.

Tags: your phone, unlock your, unlock your phone

Unlock Motorola Razr Security

An unlocked Motorola Razr.

Your Motorola RAZR flip-phone comes equipped with a security feature that allows you to lock the phone in order to prevent anyone else from using it. Once you've locked the phone, however, you need to enter a code in order to unlock it if you ever want to use it again. The good news is that this security feature is designed to be easily locked and unlocked as long as you know the four-digit code.

Instructions

1. Flip open your Motorola RAZR so that you have full access to the screen display and keypad.

2. Wait for the message to appear on the screen prompting you to enter the four-digit security code required to unlock your RAZR phone.

3. Enter the four-digit code on your phone's keypad, and then press the "OK" button located just below the display to unlock it. If you haven't chosen a specific unlock code, it is automatically set to the last four digits of your cell phone number.

Tags: four-digit code, Motorola RAZR, security feature

Wireless Problems With A Lexmark 6500

Lexmark is an international publicly held company that specializes in professional imaging products. One of the printers in its line is the Lexmark 6500 printer, which operates wired and wirelessly.

Network

In order for the Lexmark 6500 to work as a wireless printer, it needs to be connected to a functioning wireless network. If you are experiencing problems printing wirelessly, the first step you should take is to verify that your wireless network is functioning properly.

Verify Range

Your printer also needs to be in range of the wireless network. Network ranges will vary depending on the router you use. Typically, the printer should be within 100 to 150 feet of your wireless router.

Standard Checks

Make sure to check that the printer is plugged in and turned on. The Lexmark 6500 also requires software to function properly, referred to as a "driver." Make sure that you have installed the driver to your computer or visit the Lexmark website in order to download the driver.

Tags: Lexmark 6500, wireless network, Make sure, your wireless

Format A Mobile Memory Card

USB cable have rectangular shaped ends.

Formatting a mobile memory card is a simple task that can be accomplished with a computer, regardless of the manufacturer of the mobile memory card. Formatting rearranges the storage sectors in the memory card, which makes the download and uploads speeds faster for the card. However, formatting will erase the data on the mobile memory card, which is something to consider before beginning the format process. In order to format the card, you are going to have to connect it to a computer by either plugging it into your mobile device, and then connecting that mobile device via USB cable to your computer.

Instructions

1. Establish a connection between the mobile memory card and the computer.

2. Open the "Computer," or "My Computer" shortcut on the desktop and locate the mobile memory card.

3. Right-click the mobile memory card and select "Format..."

4. Click "Start" in the window that appears to begin the formatting process.

Tags: memory card, mobile memory, mobile memory card, card which, memory card which, mobile device

Auto Connect An Iphone To A Bluetooth Device

Pair iPhone devices to transmit phone contacts or files wirelessly via Bluetooth.

Your iPhone is capable of detecting any supported Bluetooth device within range. However, it does not automatically connect until you first pair the device with your iPhone. When your iPhone connects to a Bluetooth device the first time, it remembers the device for the next time. This way, when you turn on the Bluetooth device and bring it within range of your iPhone, it will automatically connect.

Instructions

1. Put the Bluetooth device into "discoverable" mode. The exact steps will vary based on the manufacturer and model of the device. Consult the documentation.

2. Touch the "Settings" icon on your iPhone.

3. Select "General," then touch "Bluetooth." Wait for your iPhone to detect the Bluetooth device and display it in the list.

4. Touch the new device in the Devices list, then enter in the password, if necessary. The password is usually provided with the documentation that came with the device. Wait for the pairing process to complete before using the Bluetooth device.

Tags: your iPhone, Bluetooth device, Bluetooth device, automatically connect, within range

Pair Jabra Vbt2050

Pair Jabra VBT2050

The Jabra VBT2050 headset offered by Verizon Wireless is compatible with most Bluetooth-enabled phones, regardless of carrier. The headset allows for hands-free use of your mobile phone as long as you are connected and within range--no more than 33 feet apart. To use your phone and Jabra headset together, you'll first need to pair them. Pairing the Jabra VBT2050 is relatively easy. Start with a fully charged battery--a complete charge takes about two hours.

Instructions

1. Power on your phone and select "Settings," then "Bluetooth." Select "On" to turn Bluetooth on.

2. Press and hold your headset's "Answer/End" button for approximately two seconds. (This is the round, silver button on the front of the headset.) Release the button when the indicator light remains solidly lit in blue. The headset is now in pairing mode.

3. Open the "Bluetooth" option in your phone's menu, then choose "Add New Device" or "Look For Devices." Wait for your phone to locate the headset.

4. Highlight "Jabra BT2050" from the "Devices Found" list. Press "Select" or "Pair." Enter "0000" when prompted for a pass code, then press "OK." Your phone will confirm successful pairing and connect to the headset.

Tags: Jabra VBT2050, your phone, Pair Jabra

Rotate A Screen On A Phone

Various mobile phones allow you to rotate the screen.

Screen rotation on a mobile phone allows you to see the screen right side up no matter what position you have the device in. Some phones require you to enter a code to rotate the screen, while others have an automatic screen-rotation feature. While these phones usually have automatic screen rotation turned on by default, you may find that it has been disabled and you need to turn it back on before the screen rotates.

Instructions

Nokia

1. Enter "*#5512#" on the keypad to rotate the screen to the right.

2. Enter "*#5513#" on the keypad to turn the screen upside down.

3. Enter "*#5514#" on the keypad to turn the screen left.

4. Enter "*#5511#" on the keypad to return the screen to normal.

iPhone

5. Double click the "Home" button.

6. Swipe right until you get to the last set of icons in the multitasking bar (you know it is the last set when the "Play/Pause" and "Skip" buttons for iPod or Pandora appear).

7. Look for the icon that looks like a circular arrow and tap it. Screen rotation is enabled, meaning the screen rotates when you switch the iPhone's position.

Samsung Galaxy S GT-I9000

8. Tap the "Menu" key and choose "Settings."

9. Choose "Display."

10. Check the "Auto-rotate screen" option.

Tags: have automatic, keypad turn, keypad turn screen, rotate screen, screen right, screen rotates, turn screen

Fix A Nokia N95 With 8gb Phone When The Upgrade Died

If you performed an upgrade of your Nokia N95 mobile device and something went wrong, it could have a negative impact on the performance of the device. In such a case, you can try a soft reset of the device, which is resetting the device without losing all of your customized settings and downloaded files and programs. If that does not work, you may need to perform a hard reset of the device, which does erase all your settings. Both a soft reset and a hard reset can be performed by entering in a code, while a hard reset can also be performed by holding certain keys.

Instructions

Use Codes to Reset

1. Soft-reset the device by using the keypad to enter in the *#7370# code.

2. Hard-reset the device by using the keypad to enter in the *#7780# code.

3. Wait for the device to reboot.

Manually Hard Reboot

4. Turn the device off (if it is not already off).

5. Press and hold the "Call Answer" key (the green button on the keypad), the "*" key and the "3" key. Turn on the device while holding these keys.

6. Continue holding the keys until the device resets.

Tags: hard reset, device using, device using keypad, device which, keypad enter, reset device

Clean An Emachine 5310

Cleaning your E-Machine 5310 regularly will help to ensure that your family enjoys the use for years to come.

To keep your computer in proper operating order, clean it periodically. This applies to laptops and desktops alike. A dirty PC can be prone to many problems, such as overheating. Cleaning your E-Machine 5310 laptop is no different from cleaning any other laptop. With periodic maintenance, you ensure that your E-Machine 5310 has a long, healthy life.

Instructions

1. Power down your laptop and unplug the power adapter from the wall.

2. Wipe down the outer case of the E-machine 5310 with anti-static computer wipes. These wipes are multi-purpose and can be used to clean many surfaces on your laptop.

3. Use a circular motion to clean your screen with the anti-static wipes. Don't press too hard, as you may damage the delicate display. Remove streaks with a soft, clean cloth.

4. Use a can of compressed air to clean your computer ports, fan and keyboard. Gently blow the air to dislodge any dirt. The fan is an area especially prone to collecting dust, and must be kept clean to prevent overheating. Blow between the keys of your keyboard with the compressed air to clean it out.

5. Open the CD/DVD drive of your E-Machine 5310 and blow compressed air inside the drive of your laptop to remove dust.

6. Place the CD/DVD drive cleaner in your laptop and close the tray. This will clean the laser eye of your drive that reads the information on your CDs and DVDs. Close the drive tray and follow the on screen instructions. The drive cleaner will run itself through a cleaning process after you start it.

Tags: E-Machine 5310, your E-Machine, your E-Machine 5310, your laptop, clean your

Use A Headset With Skype

Skype is a wonderful program that allows you to talk with other Skype users via the computer. All you need to use Skype is a home computer, running Windows with a sound card, that came with speakers and a microphone built in or a headset. You will get the best results from using the Skype program if you have a headset. Most computers now have built-in microphones and speakers which are perfectly fine to use for the voice chat program; however, Skype highly recommends purchasing a headset instead. Headsets are relatively inexpensive and can be found at most electronic stores, some department stores and online at the Skype store.

Instructions

1. Purchase a headset that has a microphone that has either two separate connectors or a USB connector.

2. Connect the headset to your computer. Ensure that you are connecting the right connector to the right plug. They are usually color coded green and red.

3. Turn on Skype and log in with your user name and password.

4. Click on "Skype," then "Preference," then "Audio." Select the headset that you have just connected to your computer. You are now ready to use Skype with your headset.

5. Use the Skype troubleshooter if you have any problems.

6. Use Echo123 on the Skype Web site if your sound is not working properly. This program tests to see if your headset is working.

Tags: headset that, Skype with, Skype with your, with your, your computer

Unlock A Nokia 6030 Tmobile Cell Phone

By default, your Nokia 6030 mobile phone is locked to your phone provider's network. There are codes, however, that you can obtain that allow you to connect your phone to any network. To get such a code, you can call your phone's provider and ask them for it. If they do not give you the code, you can purchase one from a third-party website. Keep in mind, however, that whatever you decide to do, you need to know your phone's International Mobile Equipment Identity (IMEI) number. You also need to have a subscriber identity module (SIM) card from another network.

Instructions

Unlock With Provider

1. Enter "*#06#" with the phone's keypad to find out its IMEI number. Write this number down.

2. Call your phone's provider. Speak with a customer representative and give him your phone's IMEI number. Ask the representative for the unlock code and, if he gives you the code, write it down.

3. Remove the battery from the back of the phone and remove the phone's SIM card. Insert a SIM card from another network in its place. Enter the unlock code you received (if the representative gave you one) when prompted. A message stating that the SIM restriction is removed should appear on the screen.

Third-Party Source

4. Enter "*#06#" with the phone's keypad to find out its IMEI number. Write this number down.

5. Go to a website that sells unlock codes and provide the website with your phone's IMEI number. Purchase an unlock code and write the code down. See the links in Resources for websites that sell unlock codes.

6. Remove the battery from the back of the phone and remove the phone's SIM card. Insert a SIM card from another network in its place. Enter the unlock code you purchased when prompted. A message stating that the SIM restriction is removed should appear on the screen.

Tags: your phone, IMEI number, unlock code, your phone provider, another network, card from

Remove A Memory Card From A Cell Phone

Remove a Memory Card From a Cell Phone

Cell phones not only have their own internal storage, many also have external storage capabilities as well. This means that with a memory card you can store games, pictures, videos and possibly more on the card as a way to free up memory on the cell phone. The memory card that fits into cell phones with an external slot is called a microSD memory card.

Instructions

1. Determine where the card is stored. It will most likely be on one of the sides of the cell phone. It will have a cover with what looks like a little cartridge on it.

2. Pop open the cover to reveal the card in the slot. The cover will be loosely connected to the cell phone so be careful not to tear it off. Once the cover is removed, you will be able to see the small cover inside.

3. Press the card in gently with your index finger and the card will pop out.

4. Pull the card all the way out. You can now use it for a different cell phone or device that supports microSD memory. You can also use it with a SD card adapter for use on a computer or laptop.

Tags: cell phone, memory card, Card From, Card From Cell, From Cell, From Cell Phone, Memory Card

Remove The Nokia N95 Screen

You'll need a screwdriver to remove the Nokia N95 screen.

The Nokia N95 is a cellular phone with a front screen that retracts to reveal a keypad. Because there are exterior moving parts on this phone, you may be intimidated at the thought of any kind of screen removal or repair. But since the LCD screen is located on the front of the phone, there is very little disassemble if you need to remove it. And the whole process can be completed in just a couple minutes.

Instructions

1. Turn your N95 off, turn it over and slide the back battery cover down and off the unit. Remove the battery and set it aside.

2. Pull the sliding front half of the unit down to reveal two screws on the back of it. Remove the screws.

3. Move the slider all the way up to expose two more screws on the rear of the top of the slider. Remove the screws.

4. Turn the unit right-side up and run your finger along the seam where the top plastic frame meets the front phone screen. Pop the cover off to remove it.

5. Lift the keypad up and place it face down over the lower half of the unit to expose the orange screen cable connected just below the screen.

6. Unplug the screen cable from its port on the phone and remove the screen.

Tags: front phone, half unit, Remove screws, screen cable

Pair A Plantronics Headset To A Blackberry Phone

Using a Plantronics headset with a BlackBerry phone can help drivers stay focused.

A Plantronics Bluetooth headset can be used for hands-free communication on a BlackBerry. The headset fits over the ear and can be used to answer calls with the touch of a button. You can even set up the headset to automatically answer calls without touching the answer button. Connecting the Plantronics headset with a BlackBerry phone, or pairing, is a simple process that can be completed within minutes.

Instructions

1. Charge the Plantronics headset completely.

2. Turn on the headset by holding down the call button until it begins to flash blue and red.

3. Press the "Menu" key on the BlackBerry, then select "Options" and "Bluetooth."

4. Press the "Menu" key, then select "Add Device."

5. Click the radio button next to "Search for devices from here," then click "OK."

6. Select the Plantronics headset from the list of found devices, then enter the passcode for the device. The default passcode is "0000."

7. Press the "Menu" key, then select "Connect." You should receive confirmation that the devices were successfully paired.

Tags: Plantronics headset, Press Menu, then select, answer calls, BlackBerry phone, headset with, headset with BlackBerry

Get The Connect The Dots Lock On Android Phones

As people use smartphones to store more and more information, the need for effective security becomes paramount. For Android smartphones, one key way to help secure the device is set up a password that prevents others from accessing the phone's content. "Connect-the-dots" is a variation on the password concept that uses a pattern instead of a set of numbers or letters to gain entry into the phone.

Instructions

1. Press the "Menu" button on the Android. Depending on the phone, this button may be located in different spots, but is often located at the bottom of the screen.

2. Press on the "Settings" button that will appear onscreen after pressing the "Menu" button. The settings button can also be accessed in the application widget list without pressing the menu button.

3. Select the "Location & Security" tab that appears onscreen. This will open a new list of options.

4. Press the "Set Unlock Pattern" button that appears onscreen. This will lead to a screen where the user can set up the connect-the-dots password.

5. Draw whatever connect-the-dots pattern that is desired with the user's finger. This pattern can as simple or intricate as the user demands. Draw the patter twice to confirm it. From that point on, the user will be required to draw the connect-the-dots pattern to unlock the phone after it has gone into a resting mode.

Tags: appears onscreen, appears onscreen This, button that, connect-the-dots pattern, onscreen This

Clean A Tv Screen

Clean a TV Screen

Cleaning a TV screen is a very simple and necessary task. Taking care not to damage the surface of the device is of utmost concern. Once the television screen has been properly cleaned, a bright, crisp picture is sure to please everyone. Use the following tips to clean a TV screen. Does this Spark an idea?

Instructions

1. Purchase anti-static wipes from a grocery or home improvement store. 3M Scotch Brite High Performance Cloth is an excellent choice for screen cleaning.

2. Ensure that the television is turned off and unplugged from the electrical outlet.

3. Wipe the dust from the surface of the TV screen very lightly with the anti-static wipe. Do not apply too much pressure to the TV screen surface.

4. Use a water dampened, non-abrasive or cotton cloth to wipe across the TV screen's surface to remove pet hair, dust and fingerprints. Dry the surface of the TV screen immediately after damp wiping the screen.

Tags: Clean Screen, screen surface, screen very, surface screen

Unlock A Nokia Gophone

A GoPhone can be unlocked for use on other networks.

There are numerous reasons to unlock a phone that is locked to a network. For example, if traveling abroad, you can rack up huge roaming charges that can be avoided by buying a local SIM card; however, that SIM card will not work on a locked phone. Furthermore, if you decide you want to use your Nokia on another North American network, you will not be able to. Fortunately, cellular phones with SIM cards, such as the Nokia's Go Phones, can be easily unlocked.

Instructions

1. Type *#06# on the Go Phone to obtain the IMEI number. This is a 15-digit code that identifies any individual phone worldwide.

2. Obtain an unlock code for the phone. Certain cell phone providers will provide unlock codes. Codes can also be obtained through a number of online services such as gsmliberty.net and cellcorner.com.

3. Enter the code: "#PW+". For the phone to display "P," push "*" 3 times in one second. For "W" press "*" four times in one second. For "+", push "*" 2 times in one second.

4. Enter the unlock code and the phone should provide a message indicating that it has been unlocked.

Tags: code phone, times second, push times, push times second, unlock code, unlock code phone

Fix The Automatic Car Windows In A Kia Optima

The power windows in the Kia Optima get their power from a fuse under the driver's side dash. The power window switch in the driver's door has an automatic-down circuit board under the driver's side window switch. All the windows can be operated from the driver's door as well as from the individual doors. When the power windows fail or an individual window fails to operate, the cause should be explored first to determine the correct repair.

Instructions

1. Check the fuse for the power windows. Operate the windows and see if the problem is isolated to one window. If not, the switch is most likely bad and needs more diagnosing.

2. Remove the door panel to the inoperative window. Start by removing the two Phillips screws in the area of the arm rest and the one screw that holds a plastic cover in front of the door handle. Remove the plastic cover over the retaining nuts for the outside side-view mirror.

3. Insert the common screwdriver in between the door panel and the door to pry out the trim fasteners along all three sides of the door panel. Hold the door panel away from the door enough to disconnect the electrical connectors from the window switch and the power door locks.

4. Remove the door panel and then remove the window switch from the panel. Plug the switch into its connector and turn the ignition key on. Move the switch in both directions and listen for the motor to work. If it does not, check the back-side of the switch with the voltmeter as it is operated to see if there is power to the terminals when activated. If there is power, the motor is bad. If there is no power, the switch is bad.

5. Remove the bolts holding the window to the horizontal track. Insert the common screwdriver in between the window and door to act as a wedge to hold the window up when the regulator is removed. Turn the key off and disconnect the switch.

6. Disconnect the electrical connector from the window motor. Remove the four nuts--two on each side of the door--holding the window track in the door. Remove the three bolts holding the window motor to the door. Remove the track with the motor from the access in the door. Install new parts in reverse order of removal.

Tags: door panel, window switch, power windows, there power, bolts holding, bolts holding window

Instructions For Operate A Nokia Cell Phone

Every cell phone has a different interface depending on its make and model. When you switch from one handset to another, you might find it difficult to adapt to the new interface. In the beginning, you will have some difficulty accessing the phone's features, but you become used to the new product gradually. Most of the Nokia cell phones have the same interface and work the same way.

Instructions "Contacts" > "Names" > "Options" > "Add new contact." Then enter the last name, first name, and the phone number of the person. To edit a contact, search him in the contacts list, and select "Details." Go to "Options" > "Edit" and change the specified details."

5. Press the "Menu" button to access the menu. If you want to change the menu view, select "Options" > "Main menu view" > "List," "Grid," or "Grid with labels." If you want to rearrange the menu, scroll to the menu you wish to move, and choose "Options" > "Organize" > "Move." Make your adjustments using the up and down keys, and select "OK." Then press "Done" > "Yes."

6. Send a text message (SMS). Go to the "Menu" > "Messaging" > "Create Message" > "Text Message." Enter the recipient's cell phone number in the "To" field. If you want to retrieve a number from the contacts, go to "Add" > "Contact," and scroll down the list to select the contact. After adding the contact, type in the "Message:" field, and press "Send."

7. Access your call log. Go to "Menu" > "Log" > "Missed Calls," "Received Calls" or "Dialed Calls." To view the recent missed, received and dialed calls chronologically, select "Call log."

8. Select a particular profile for your phone. Go to "Menu" > "Settings" > "Profiles" and select a particular profile from the list. To customize the selected profile, select "Personalize."

9. Change your phone's theme to personalize your wallpaper, screen saver, color scheme and ringtone. Go to "Menu" > "Settings" > "Themes." Scroll down the list, and select "Select theme" when you've found the one you like.

10. Select a particular ringtone for the phone. Go to "Menu" > "Settings" > "Tones" > "Incoming call alert." Go through the list of alerts available, and select the one you like.

Tags: list select, Menu Settings, cell phone, down list, down list select, menu view, particular profile

Find Unlisted Cell Phone Numbers For Free

Find Unlisted Cell Phone Numbers for Free

Unlike home phone numbers, cell phone numbers can be difficult to obtain through a traditional phone directory. People often lose touch with their loved ones because phone numbers are constantly changed. It can become annoying when you call a number and find out that someone else owns that number. Finding an unlisted cell phone number is possible by doing a bit of research, and it can be done for free.

Instructions

1. Speak to mutual friends to find out whether they have recent information on the person you are trying to contact. It is possible that the person asked someone to pass the new information on to you.

2. Call any numbers that you might have for the person. Sometimes the new owner of the number will be able to give you the person's current information, if they have been authorized to do so.

3. Conduct a web search for the person you are trying to contact. Although the number is unlisted, you can search the person's name and last known location. This can generate information for the individual and the cell phone number might be listed.

Tags: cell phone, Cell Phone, cell phone number, Find Unlisted, Find Unlisted Cell

Why Won'T The Sound On My Computer Work

A sound card lets PC users enjoy music, games and Youtube videos. If sound stops coming out of the PC, the user needs to track down the cause to get things working again. The most common PC audio problems are also the easiest to fix.

Check for the Simple Stuff

Cords frequently come loose, especially in houses with pets. Make sure the cord for the PC speakers is plugged into the sound card and that the switch had not been turned off accidentally.

Sound Card Driver

The user can determine if a sound driver for his sound card is loaded by clicking on the start menu, entering the control panel and clicking the system icon. Select the hardware tab from the dialog box and scroll down to audio devices. Select your audio device and see if the driver is installed. If the user has an Internet connection, he can have Windows search for an updated driver for the device. Installing the driver directly from the sound card installation CD often works better.

IRQ Conflict

If two devices use the same IRQ on the computer, neither one works properly. (IRQ stands for interrupt request and is used in Assembly and machine language to manipulate PC devices. Executable programs run machine code.) The IRQ must be changed for both devices to work. Windows does not let the user change IRQ settings by default, but users can adjust them within the device manager. Click on resources and turn off the automatic option. Change one of the conflicting devices to an unused IRQ.

Sound Only Out of One Speaker

Provided the speaker has not stopped working, this problem can often be fixed by checking the volume settings and adjusting them accordingly.

Component Services

If a Windows user does not have sound service, the user may not have the appropriate Windows service turned on. Click on the start menu. Click on administrative tools. Select component services from the pull down menu. Enable the Windows Media and Audio services if they are not already enabled.

Bad Sound Card

If the sound card itself is bad, the user must replace it with a working PC audio device.

Tags: audio device, sound card, sound card, start menu

Enable Bluetooth Services On My Pc

Bluetooth can be used to link a PC and devices such as headsets.

Bluetooth is short-range wireless technology used to transfer data between electronic devices. Such devices include PCs, mobile phones, headsets, digital cameras and printers. It can eliminate the need for wires in certain connections, meaning devices can be connected to a PC quickly and easily to transfer information. This can include photos, music and voice communications for making Web phone calls.

Instructions

1. Check that your computer has a Bluetooth adapter. Open the "Start" menu and click on the "Control Panel" icon. Click on "Performance and Maintenance," followed by "System." In the system properties window, click on the "Hardware" tab. Click on "Device Manager" and expand the "Bluetooth Devices" icon to list the Bluetooth capability. One device listed will indicate that your PC has Bluetooth capability.

2. Turn on the Bluetooth adapter. On many notebooks and PCs it is indicated on the outside of the computer or via a function key on the keyboard displaying the Bluetooth or wireless logo.

3. Right-click on the Bluetooth icon in the system tray on the right hand side of the task bar. Select "Start the Bluetooth Device" from the pop-up menu.

4. Test the Bluetooth connection. Right click on the Bluetooth icon in the system tray and select "Quick Connect" for devices that are already added, or "Add a Bluetooth Device" to start the Bluetooth setup wizard. Once paired, your PC can now interact with Bluetooth devices.

Tags: Bluetooth adapter, Bluetooth capability, Bluetooth Device, Bluetooth icon, Bluetooth icon system, icon system, icon system tray

Remove Wheel Lock Nuts

A wheel lock nut or wheel locking nut is a device used to "lock" the rims on a vehicle. With a lock nut in place, it should be extremely difficult to impossible to steal the wheels off of your vehicle. Unfortunately, if you lose the key to the locking nut, you won't be able to remove it without doing a bit of work. It may seem unbelievable, but lug nuts are very soft and if you need to, you can remove a wheel lock nut by chiseling it off.

Instructions

1. Place the cutting edge of the chisel over the top of the wheel lock nut. Do not place the cutting edge on the face of the locking nut. When you position the chisel cutting edge, you are only going to chisel off the very end of the locking nut.

2. Hit the end of the chisel with the hammer. Because lug nuts are soft, you should be able to easily chisel off the tip of the wheel lock nut. You don't want to chisel off more than the tip because you could end up hitting the studs underneath that the wheel lock nut is threaded on.

3. Position the grade 8 bolt over the end of the chiseled wheel lock nut.

4. Turn on the tig welder and let it heat up. Position the end of the tig welder on the bolt. Put your protective face mask/shield over your eyes. Spot weld the wheel lock nut to the grade 8 bolt.

5. Place the socket wrench and appropriately sized socket over the end of the bolt.

6. Place the breaker bar over the end of the socket wrench and turn counterclockwise, and the bolt will come off along with the wheel lock nut.

Tags: wheel lock, wheel lock, cutting edge, bolt Place, grade bolt, lock place, socket wrench

What Is The Sis Pci Ide Controller

These white slots are PCI slots

A SiS PCI IDE controller is a peripheral card that adds additional IDE drive channels to a computer through a PCI slot. The controller is made by the company Silicon Integrated Systems (SiS).

What It Does

This is an IDE slot on a hard drive.

A SiS PCI IDE controller can be used to add more IDE channels to a computer. IDE is an antiquated type of connection that is used to connect CD-Rom drives, DVD-Rom drives, floppy disc drives and hard drives to a computer. Most computers that use IDE only support between two and four devices, because of physical and software limitations. Additionally, PCI IDE controllers can be used to add IDE connections to computers that use the SCSI connection type.

How It Connects

A SiS PCI IDE controller connects to a computer through the white-colored PCI slots on the motherboard. Most computers made before the PCI Express standard became dominant were manufactured with between two and six PCI slots.

About SiS

SiS is a Taiwanese company founded in 1987 that specializes in making computer chip sets and components. They are one of many companies that, at one point, manufactured PCI IDE controller cards.

Tags: channels computer, computer through, computers that, Most computers

Unlock The Nokia E51

Nokia E51 phones can be unlocked to allow them to work with any carrier's SIM card.

Telephones that operate on the Global System for Mobile Communication (GSM) network are sometimes locked to a particular provider's network. GSM phones are designed to work on any carrier's network by simply changing the phone's Subscriber Information Module (SIM) card. Phones that are locked to a network will not switch networks when a SIM from another carrier is inserted. The Nokia E51 is a GSM phone that can work well on any global network. If yours is locked to a particular cellular provider, you can remove the lock to allow it to work on any network in the world.

Instructions

1. Insert a SIM card into the phone. If one isn't already in the phone, slide the back of the phone down to remove the battery cover. Remove the battery by pulling up from the bottom. Slip the SIM card with the notch to the top-right into the SIM holder above the battery compartment.

2. Find the International Mobile Equipment Identity (IMEI) for your phone. There are a couple of ways to do this. One is to remove the back from your phone and look at the sticker under the battery. The number is printed on that sticker. The other way is to enter the code *#06# on the phone's keypad. Press "send" and your phone will display its IMEI. Some E51 language implementations may call the IMEI a "Serial number."

3. Once you have the IMEI, either enter the IMEI and your phone's carrier into the unlock code generator or on a website that sells unlock codes. Some independent cellular phone retailers, especially those outside of the United States, will also sell you an unlock code.

4. Remove the SIM card from your phone and replace the battery.

5. Power the phone on and enter the unlock code. Many commercial unlock code services will provide several codes in case one doesn't work. Unlock codes are in the format #pw+555 979 5076+3#. If the code is accepted, a message indicating that the SIM restriction is turned off will appear.

Tags: your phone, unlock code, from your, from your phone, IMEI your, IMEI your phone, locked particular

Make Cheap International Calls

If you need to make international calls on a regular basis, you will risk huge bills if you use traditional calling services. Fortunately, there are several ways to make cheap international calls.

Instructions

1. The easiest way to make cheap international calls is online. You don't need to mess with any PIN numbers or calling cards. You can get started almost immediately. If you want to make cheap international calls online, then you can use Skype.

2. To make cheap international calls with Skype, visit skype.com. You will have to download their program and install it on your computer.

3. Once you download and install Skype, you will need to sign up for an account. Once you sign up for an account, you will need to buy credit. The minimum credit is 10 euros. Then, you can dial numbers internationally using Skype. Just be sure your computer has a microphone and speakers or headphones!

4. If you'd rather make cheap international calls using a traditional telephone, then you will need a calling card. You can always go to the nearest convenience store and buy an international calling card. In the United States, most gasoline stations sell these. These are fairly cheap, but are not as cheap as Skype.

5. If you want to save more money than using traditional calling cards, you can also visit speedypin.com. There, you can purchase very inexpensive electronic calling cards. In some cases, this will be even cheaper than using Skype.

Tags: international calls, cheap international, make cheap, calling cards, cheap international calls

Install Ovi On A Nokia N81

Install OVI on a Nokia N81

OVI, which means "door" or "gateway" in Finnish, is the global brand for Nokia's Internet services. Ovi lets you organize your contacts, share media and stay in touch with friends and communities from one single location. With Nokia N81's Internet connectivity feature and its compatibility with the Ovi software, you can enjoy the Ovi Store, Ovi Share, and Ovi Map services. These services allow you to download freeware and commercial games, apps, and ringtones directly onto your device.

Instructions

1. Press the "Menu" key on the Nokia N81 to access the main menu screen. Navigate to the phone's Internet browser and open it.

2. Enter the address from the Ovi Store in the address bar to access the website (see Resources).

3. Select the "Download" link to download the Ovi installation file. Once the download process is complete, follow the on-screen instructions to install Ovi on your Nokia N81 handset.

Tags: Install Nokia, Nokia Internet

Play Amr Files In Windows Media Player

Windows Media Player does not support the AMR format.

Adaptive Multi-Rate files (AMRs) appear most often as voice recordings on cellphones. The format, developed by Ericsson, efficiently compresses the human voice in a small file size. In order to play your AMR files in Windows Media Player, you'll first need to convert them into a format the program supports, such as the Windows Media Audio (WMA) container. In order to complete this conversion, you can use an online converter like Media Converter, Zamzar, or Media-Convert.

Instructions

Media Converter

1. Visit Media Converter (see Resources), click "Upload a file," pick your AMR file and click the "Arrow" button.

2. Choose "WMA" as your target format and click the "Arrow" button.

3. Click "Start" to begin the conversion and "Download" to receive your WMA.

Zamzar

4. Visit Zamzar (see Resources) and click "Browse"/"Choose File" to pick your AMR.

5. Choose "WMA" as your target format and type your email address into the "E-mail" window.

6. Click "Convert" and open your email inbox. Once the conversion finishes, you'll receive an email housing your WMA download link.

Media-Convert

7. Load Media-Convert (see Resources) and click "Browse"/"Choose File" to select your AMR.

8. Choose "Adaptive Multi-Rate (.amr)" as your input format and "ASF Audio (.asf,.wma)" as your output format in the drop-down menus.

9. Click "OK" to start the conversion and "Download" to receive your WMA.

Tags: Windows Media, Media Converter, Media Player, Resources click, Windows Media Player, Adaptive Multi-Rate

Connect To The Internet Using A Router

A router allows multiple computers to share an Internet connection.

Configuring a router for Internet access is a common practice that any individual can accomplish. Most routers on the market today are configured in much the same way with some slight differences. It is important to consult your documentation in addition to reading this material to ensure success.

Instructions

1. Locate a source of power for your router and power it on. Your router must be located next to a telephone or cable outlet.

2. Connect the cable outlet from the wall to your router for cable Internet service or connect the telephone cord from the wall to your router for DSL Internet service.

3. Locate an unused port on the back of your router. Connect one side of an Ethernet cable to the empty port and the other side of the Ethernet cable to the back of your computer.

4. Recycle the router by turning the power off and on. Reboot your computer to ensure it receives a proper connection or IP address. This IP address allows you to connect to the administrator portal to obtain Internet access.

5. Open the administrator portal to configure the router. Typically, this requires you to open an Internet browser and type the following: "192.168.1.1." Some routers will automatically open to the page for you to configure Internet access as well. The instructions provided with your router will give you the exact IP address if it is different from the one above.

6. Walk through the wizard on the administrator portal page. You will be asked to change the log in and password to secure your access to the portal page. If you did not purchase a static IP address, you router will be automatically configured or you will be prompted to enter the specific address during the wizard. At the end of the wizard, click Finish to begin browsing the Internet.

Tags: administrator portal, Internet access, your router, back your, cable outlet, Ethernet cable

Cut Open Wire Telephone Lines

Avoid tangles like this by cutting your telephone wire to length.

Knowing cut open wire telephone lines makes tasks such as adding a telephone extension in your home easy. You need a few simple tools and practice to build up basic experience in electrical connections. Working on telephone wire is a good entry to more complex electrical wiring, including A/V, doorbells and intercoms. You can adapt this skill to TV and radio antenna troubleshooting, and even power connectors, after taking appropriate precautions and using test equipment.

Instructions

1. Detach the telephone wire from any fixtures or telephones. Measure your wire length prior to cutting.

2. Cut away two inches of the outer sleeve with the pocket knife to expose four insulated wires. Cut slowly to avoid damaging the wires beneath the outer sleeve.

3. Separate the wires from each other. Strip one half-inch of insulation from each of the four wires, one wire at a time, with the wire stripper or pocket knife.

Tags: telephone wire, from each, outer sleeve, pocket knife, wire length

Transfer A Cell Phone Contact List To A Mac

Connect your cell phone to your Macintosh computer to back up your contacts.

Depending on your cell phone's compatibility, your contacts can be backed up to your Macintosh computer using the default iSync application. As of August, 2010, iSync 3.0 supports synchronization for Palm, Motorola, Siemens, Nokia, Panasonic, Samsung, Sony Ericsson and Sendo. Once a connection is established, you can merge data between your Macintosh computer and your cell phone, or simply transfer information one way, according to "Mac OS X Leopard: The Missing Manual."

Instructions

1. Insert the cell phone's USB cable into the cable port on the phone, and insert the opposite end of the cable into your Macintosh's USB port.

2. Open the iSync application located in the "Applications" folder in Finder. Select "Sync Devices" to scan your computer for connected mobile devices, and double-click the name of your cell phone in the discovered devices list. ISync will notify you if the device is not compatible for synchronization.

3. Select your preference for existing contacts in the Address Book, and select the empty box next to "Contacts" and click the drop-down menu. Click "All Contacts" on the drop-down menu. When transferring contacts to your Macintosh computer, you can merge the phone's contacts with the computer's contacts, keep the existing computer contacts or erase them.

4. Selec the "Sync Devices" button to transfer your cell phone's contact list, and unplug the USB cable from the computer once the synchronization process is complete.

Tags: cell phone, your cell, your cell phone, your Macintosh, Macintosh computer, your Macintosh computer

Download Adobe Flash Player To The Motorola Droid Phone

Android is Google's flagship mobile operating system.

Adobe's Flash powers much of the Internet's content, ranging from games to websites. However, it can be difficult to recreate the same user experience on a mobile platform. If Flash isn't installed on a smartphone such as the Motorola Droid, you won't be able to view Flash content. With Android's applications market, though, it's easy to install Flash player on your Motorola Droid.

Instructions

1. Open the "Market" application on your Droid. By default, this should be one of the applications listed on your Droid's homepage.

2. Press the magnifying glass on the upper-right hand corner of the screen to bring up the search prompt.

3. Type in "Adobe" and press "Enter." This will bring up a page of search results.

4. Select the application "Flash Player 10.2" made by Adobe Systems. This is the latest Android-compatible version of Flash Player.

5. Press "Install" to download and setup the application on your phone.

Tags: Motorola Droid, Adobe Flash, application your, Flash Player, your Droid

Pair My Jabra Bt160 Bluetooth To My Phone

The Jabra BT160 Bluetooh headset is compatible with most Bluetooth enabled phones, allowing you hands-free use of your phone's call functions. To use your Jabra headset and phone together, you'll first need to connect them by pairing. Pairing is a one-time process that takes just a few moments. Your phone stores the settings you enter. Charge your headset completely before you attempt to pair your devices.

Instructions

1. Open the main menu and select "Settings," then "Bluetooth." Choose "On" to turn Bluetooth on.

2. Press the headset's "Answer/End" button -- located on the front of the device -- to turn it on.

3. Simultaneously press the headset's "Answer/End" button and "+" (volume up) button. Release the buttons when the indicator light remains steadily lit in blue. The headset is now in pairing mode.

4. Choose "Add New" or "Discover" from your phone. Wait for the phone to locate your headset.

5. Select "BT160" from the list that appears.

6. Enter "0000" when prompted for a passkey. Press "OK." Your phone and headset are now paired and will connect automatically.

Tags: Answer button, headset Answer, headset Answer button, your headset

Unlock Your Nokia Memory Card Through Your Imei Number

Use the IMEI code to switch out Nokia's memory card.

To allow a cell phone to work with another network provider, the cell phone must be "unlocked." To change to another network from Nokia is easy and requires only a few things, like the memory card, also known as the SIM card, from the new provider and the IMEI code from Nokia, which identifies the individual phone.

Instructions

1. Contact Nokia and notify them that you wish to switch networks. Nokia will send you the IMEI code of the phone and may or may not charge, based on the original contract you signed with Nokia. The code should arrive within a few days.

2. Turn off the phone and remove the portion of the phone protecting the battery. Near where the battery sits is the slot for Nokia's SIM card. Replace Nokia's SIM card with the SIM card of the new provider chosen. They should provide this as per the new agreement.

3. Restart the phone. It will detect the new SIM card and ask for the IMEI code. Enter the code provided by Nokia using the phone's dial pad. Now the phone will operate using the new card and network.

Tags: IMEI code, another network, cell phone, from Nokia, memory card

Why Is Active Standby In A Nokia E65 Missing

The active standby mode on Nokia E65 cell phone lets you access your favorite applications and plugins more quickly, but the feature will disappear if you change your settings. Active standby will also be turned off if you restore the phone to its factory settings. You can always get active standby back and customize it again if you have accidentally disabled it.

Active Standby

Active standby is the state your phone is in when you have turned on your device, but have yet to enter any text or choose an option from the homepage. While in active standby, you can always see certain information, such as your network and service provider. If you enable it, you can also see a toolbar with applications that you want to access quickly.

Enabling

If you don't see any applications on your active standby screen, active standby may have been turned off on your device. By default, active standby is set to off on a Nokia E65, so you must turn it on after you purchase the phone. To enable active standby, go to the phone's menu and choose "Tools." After you choose "Settings" and "Phone" go to "Standby Mode" and turn active standby on. You can customize which apps appear on your homepage by going to the "Active Standby Apps" option in "Standby Mode" settings.

Restoring

A Nokia E65 that has been restored to its original settings will no longer reflect the active standby screen that you have customized. When your active standby applications disappear because the phone has been reset, you will have to enable active standby again and rebuild the list of apps and plugins that you see on the homepage.

Consideration

When active standby is disabled, regular standby is always enabled. In standby, you can still see your wireless provider and network information. While the navigation keys are used for scrolling in active standby, in regular standby the keys serve as shortcuts. For instance, the left scroll key is used to get to the screen where you write and send text messages.

Tags: active standby, active standby, active standby, active standby, active standby screen, enable active, enable active standby

Use Fring On The Ipod

Fring is a free voice over Internet protocol (VoIP) calling application that is available as a free download for the iPod Touch from Apple's App Store. The application features free two-way video calling to other Fring users, and you can use the application over any available Wi-Fi network.

Instructions

1. Download the "Fring" application on your iPod Touch. Tap the "APP Store" application and then select the "Search" option. Type "Fring" in the search bar and then select the "Fring" application. Press the "Free" button and then press "Install" to download and install the application to your iPod Touch.

2. Attach the iPod ear buds with a microphone to your iPod Touch device. The ear buds connect directly to the headphone jack on your iPod Touch and have a small microphone built in the wire. You can purchase iPod ear buds with a microphone directly from Apple or from a variety of companies that make less expensive aftermarket versions. Once connected, the iPod Touch will automatically recognize and use the microphone on the iPod Touch ear buds. The iPod Touch does not offer a built-in microphone option.

3. Press the "Fring" icon on your iPod Touch.

4. Press the "Login" button and enter your username and password. If this is the first time you are using the application, you will need to create a free account. Enter the requested information and select a username and password.

5. Press the "Buddy List" icon and select the person you would like to call. The application automatically pulls all of the contacts from your iPod Touch's address book. Select the contact you would like to call. If the contact does not already have a Fring account, you can send the contact an invitation to create a free Fring account.

6. Wait while your iPod Touch dials the contact you have selected. When the contact answers the call you can begin your telephone conversation.

7. Press "End Call" to terminate the conversation.

Tags: iPod Touch, your iPod, your iPod Touch, application your, application your iPod

Connect A Jawbone Headset

So you want to connect a jawbone headset to a bluetooth cell phone. Jawbone products have been consistently rated among the highest bluetooth headsets in terms of clarity of both sound and microphone clarity. Doing the initial connection, or "pairing" the two units only takes a couple of minutes. Once paired, simply push a button every time you wish to use it, and it will find your phone automatically.

Instructions

1. Visit your phone's Bluetooth menu, and determine add or pair a new device, but don't do it yet. For more information as to how exactly to do this, check your phone's manual.

2. Hold down the on/off button of your Jawbone headset for five to 10 seconds, or until the headset begins to flash white and red. The on/off button is usually in the middle of the headset, somewhat hidden, but you can feel it by running your finger over the surface.

3. On your cell phone, click on the button that allows you to pair or add a new device. Your phone will then find your headset.

4. Enter the pass code of "0000" when prompted by your phone.

5. Your phone should now be paired with your headset. To turn the headset on or off, hold down the on/off button until the headset makes an audible beep. When the beep is short, your headset is turned on; when the beep is long, the headset is turned off.

Tags: your headset, cell phone, down button, find your, headset turned, pair device, until headset